SEON Trooper TL4 Betriebsanweisung

Manual TypeDVR Firmware Version 2.0Document Part Number 700-0099 R008*700-0099*

Installation1–6 700-0099 R0081.5. Dimensions• Weight: 5.3 lb (2.4 kg) including lockbox• Material: steel, powder coated blackImportant: Specifications

Installation700-0099 R008 1–71.6. DVR and Component Installation1.6.1. DVR InstallationThe DVR typically ships with the locking front cover on and the

Installation1–8 700-0099 R0086. Fasten the mounting plate to the mounting surface with the four #10 × ¾ sheet metal screws or #10 × 1" self-drill

Installation700-0099 R008 1–91.6.3. Adapter Harness InstallationTo install the adapter harness for signals and speed: 1. Connect the 12-pin connector

Installation1–10 700-0099 R0081.6.5. Wake On Alarm Installation (Optional)When the Wake on Alarm function is enabled, if alarm 1 is triggered, the sys

Installation700-0099 R008 1–111.6.6. Diagnostic Button Installation (Optional)When installed, press the Diagnostic Button to cause an alarm event to b

Installation1–12 700-0099 R0081.7. Hardware Installation Final Checklist Harnesses (camera, recorder, and accessories)Check that the cables and the h

DVR Setup700-0099 R008 2–1CHAPTER 2DVR SetupThis chapter provides information and procedures for configuring the Trooper TL. This chapter contains the

DVR Setup2–2 700-0099 R0082.2. Basic DVR Configuration SettingsThe DVR menu defaults cover most operation settings, but some basic customer and region

DVR Setup700-0099 R008 2–3On power-up, with a monitor and USB mouse connected to the DVR, the Seon Trooper TL4 splash screen appears briefly before th

2About This GuideThis guide describes the installation steps for the TL4/2 DVR with firmware version 2.0 and higher.This guide provides information to

DVR Setup2–4 700-0099 R008Basic DVR configuration settings:1. In the live view, right click anywhere to show the DVR Main menu. Left click on Configur

DVR Setup700-0099 R008 2–53. In the Time and Date menu, select the following fields to show time and date for the video overlays:4. In the Configurati

DVR Setup2–6 700-0099 R0087. In the Diagnostic Display menu, select options to display as overlays in the play view.8. In the Configuration menu, clic

DVR Setup700-0099 R008 2–710. In the Recording Settings menu, click Camera. Set the recording parameters for each camera here. 11. In the Recording Se

DVR Setup2–8 700-0099 R00812. In the Configuration menu, click Alarm/Signal.13. In the Alarms and Signals menu, click Alarms.CAUTION: Select Menu Opti

DVR Setup700-0099 R008 2–914. In the Alarms and Signals menu, click Signals.The DVR signal harness has 5 dedicated signal input wire connections:• LT

2–1016. In the Alarms and Signals menu, click GPS.GPS Display: If a GPS receiver is installed, select On to display the coordinates on the play view o

DVR Setup700-0099 R008 2–1117. In the Configuration menu, click Network to edit the DVR network settings.18. In the Network Settings menu, click Advan

DVR Setup2–12 700-0099 R00819. In the Configuration menu, click System and in System Settings menu, configure as follows.20. In the System Settings me

DVR Setup700-0099 R008 2–132.3. vMax Web Laptop ConfigurationThe TL DVR can be managed using vMax Web using Internet Explorer (32 bit version only) wi

700-0099 R008 iiiInstallation1.1. Tools and Equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

DVR Setup2–14 700-0099 R008The Local Area Connection Properties window appears.3. In the Local Area Connection Properties window, select the click to

DVR Setup700-0099 R008 2–152.3.1. Connecting the DVR to the LaptopTo connect the DVR to the laptop:1. Connect one end of the Ethernet cable to a netwo

DVR Setup2–16 700-0099 R0085. Open Internet Explorer and, in the address bar, type in the DVR default IP address: http://169.254.1.1. Click Enter.The

DVR Setup700-0099 R008 2–17

DVR Setup2–18 700-0099 R008

Advanced Setup700-0099 R008 3–1CHAPTER 3Advanced SetupThis chapter provides information on uploading configuration files and firmware updates to the D

Advanced Setup3–2 700-0099 R0083.1. DVR Configuration UploadsA configuration file is usually uploaded to a DVR when the DVR is first installed or when

Advanced Setup700-0099 R008 3–36. In the System Settings menu click Program Update.7. From the Load Configuration menu, select the file to upload and

Advanced Setup3–4 700-0099 R0088. From Include Network, select whether or not to overwrite the existing DVR network settings with the new configuratio

Advanced Setup700-0099 R008 3–511. Click Back in the Program Update and then System Settings menus to save and exit the menus.12. From the Configurati

Contentsiv 700-0099 R0084.4. Alarms and Signals Menu- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Advanced Setup3–6 700-0099 R0083.1.2. Configuration Uploads in vMax WebTo remotely install a configuration update, the configuration file (received fr

Advanced Setup700-0099 R008 3–77. Select the Configuration tab and on the Configuration tab, click the System icon.8. In the Program Update Settings a

Advanced Setup3–8 700-0099 R00810. In the computer file search window, navigate to the configuration file and click Open.The configuration file name a

Advanced Setup700-0099 R008 3–914. When the progress bar shows the update is 100% complete, click OK.15. In the Titles/Display menu, update the text i

3–103.2. DVR Firmware UpdatesThe firmware version is displayed on the top right corner of every menu. The firmware update must be obtained from Seon D

Advanced Setup700-0099 R008 3–113.3. Email NotificationsIf using the iVML live video streaming feature, do not use DVR email.If required by the custom

Advanced Setup3–12 700-0099 R0085. In the E-mail settings menu, populate the E-mail configuration fields as required.6. Click Back to save.7. In the S

Advanced Setup700-0099 R008 3–1310. In the Alarm/Signal menu, click Alarms.11. In the Alarm Settings menu, select the alarm from the drop down list, a

Advanced Setup3–14 700-0099 R0083.3.2. vMax Web Email Setup1. In the Network Email settings window, populate the E-mail configuration fields as requir

Advanced Setup700-0099 R008 3–153. In the System menu, select E-mail from the Disk Full and HD Failure drop down menus. 4. Click Save.If the configure

Installation700-0099 R008 1–1CHAPTER 1InstallationThis chapter describes the installation steps for the TL4/2 DVR with firmware version 2.0. This chap

Advanced Setup3–16 700-0099 R008

DVR Configuration Menus700-0099 R008 4–1CHAPTER 4DVR Configuration MenusThis chapter describes the functions and defaults of the fields and options on

DVR Configuration Menus4–2 700-0099 R0084.1. DVR Configuration Menu TreeThe TL Configuration Main Menu shown in Figure 4-1 applies to the on screen di

DVR Configuration Menus700-0099 R008 4–34.2. Time and Date MenuUse the Time and Date menu to set the time and date settings and Auto Daylight Savings

DVR Configuration Menus4–4 700-0099 R0084.2.1. DST (Daylight Savings Time) Settings MenuConfigure the start and end date settings for daylight savings

DVR Configuration Menus700-0099 R008 4–54.3. Titles and Display MenuUse the Titles and Display menu to set the main title, camera titles, and other ca

DVR Configuration Menus4–6 700-0099 R0084.3.1. Diagnostic Display MenuUse the Diagnostic Display menu to set various diagnostic options to display on

DVR Configuration Menus700-0099 R008 4–74.4.1. Alarm MenuSelect an alarm (1-4) from the menu and configure it as required.Figure 4-7Alarm Settings Men

DVR Configuration Menus4–8 700-0099 R008Wake The wake on alarm feature is available only for alarm 1. When enabled, this feature causes the system to

DVR Configuration Menus700-0099 R008 4–94.4.2. Signals MenuUse the Signals menu to configure signals and the actions they generate. The TL supports 10

Installation1–2 700-0099 R0081.2. TL DVR System Package Contents (typical)The required and optional contents of a typical installation package are sho

DVR Configuration Menus4–10 700-0099 R0084.4.3. Speed MenuUse the Speed Settings menu to set the options for recording vehicle speed data.Figure 4-9Sp

DVR Configuration Menus700-0099 R008 4–114.4.4. GPS Settings MenuUse the GPS Settings menu to set the options for recording vehicle time and location

DVR Configuration Menus4–12 700-0099 R0084.5. Recording Settings MenuUse the Recording Settings menu to set the resolution, recording speed in frames

DVR Configuration Menus700-0099 R008 4–134.5.1. Camera Settings MenusUse the Camera Settings menus to set the FPS, picture quality, recording resoluti

DVR Configuration Menus4–14 700-0099 R0084.5.2. Timer Settings MenusUse the Timer Settings menu to set the timer schedules to turn the recording on an

DVR Configuration Menus700-0099 R008 4–154.6. Network Settings MenuThe Trooper TL DVR has an Ethernet port for connecting to a computer or the Smart-R

DVR Configuration Menus4–16 700-0099 R0084.6.1. Advanced Network MenuUse to enable the DVR for live video streaming and vehicle tracking in vMax Live

DVR Configuration Menus700-0099 R008 4–174.6.2. VMS Servers MenuSet up to enable communication with Seon vMax Commander software. Figure 4-16VMS Serve

DVR Configuration Menus4–18 700-0099 R0084.6.3. Supervisor MenuSet up to enable supervisor users in wireless environments.Set up to enable supervisor

DVR Configuration Menus700-0099 R008 4–194.6.4. User Levels MenuSet up to enable multiple users to access the DVR from vMax Web View with various perm

Installation700-0099 R008 1–31.3.1. TL4 Installation DiagramFigure 1Typical TL4 SystemExplorer® TL4Typical System SetupVehicle Electrical InterfacePer

DVR Configuration Menus4–20 700-0099 R0084.6.5. DDNS (Dynamic Domain Name Server) Settings MenuUse this menu to assign a specific host name to a DVR w

DVR Configuration Menus700-0099 R008 4–214.7. System Settings MenuThe System Settings menu allows control of system level settings and functions that

DVR Configuration Menus4–22 700-0099 R0084.7.1. Program Update MenuThe Program Update menu enables users to update the internal firmware and to store

DVR Configuration Menus700-0099 R008 4–23Figure 4-23Store DVR Configuration to USB Device MessageFigure 4-24Update DVR Firmware MessageFigure 4-25Form

DVR Configuration Menus4–24 700-0099 R0084.7.2. E-mail Settings MenuThe E-mail Settings feature requires network connectivity. If using the iVML live

DVR Configuration Menus700-0099 R008 4–254.7.3. One-Touch Settings MenuUse the One-Touch button without a video monitor.Figure 5One-Touch Settings Men

DVR Configuration Menus4–26 700-0099 R008

700-0099 R008 L–1Legal NoticeSeon Design® Inc.Seon Design Inc. is a specialist in the design and manufacture of video surveillance systems for mobile

L–2

700-0099 R008 W–1Seon Design Inc.® Product WarrantySeon Design Inc. (Seon) warrants the cameras and components listed below against defects in workman

Installation1–4 700-0099 R0081.3.2. TL2 Installation DiagramFigure 2Typical TL2 SystemExplorer® TL2Typical System SetupVehicle Electrical InterfacePer

Seon Design Inc.® Product WarrantyW–2 700-0099 R008(g) if the product has been operated outside of the specified Operating Environment specified in th

700-0099 R008 W–3The information contained herein is subject to change without notice.Extended Warranty for Certain ProductsThe following extended war

Seon Design Inc.® Product WarrantyW–4 700-0099 R008

Seon Design Inc.Unit 111, 3B Burbidge StreetCoquitlam, BC Canada V3K 7B2TelephoneToll Free Telephone 604.941.08801.877.630.7366Fax Toll Free Fax604.94

Installation700-0099 R008 1–51.4. Installation Best PracticesThe TL DVR is secured with a security front cover and a cable cover. Two cable grommets (